3D-Printer

The 3D-Printers of the FabLabs

Users of the FabLabs can use the 8 3D-Printers, 6 ones with the FFF/FDM-Method, once SLA and once Objet.

Original Prusa i3 MK3 (three)

Training period for independent usage, without previous knowledge: approx. 3 - 4 h

 Prusai3MK3-frontal
  • FFF/FDM - Method
  • Minimum layer thickness: 0,06 mm
  • Printing area of 250 x 200x 210 mm
  • Nozzle diameter: 0,4 mm
  • Heated print bed up to 120°C

Slicer: PrusaSlicer

Printer data and settings: Prusa-Support

Alternatively, the  Cura Slicer can be used, but only limited support can be given by the FabLab.

 

German RepRap X400 CE

Training period for independent usage, without previous knowledge: approx. 4 - 6 h

X400-Totale
  • FFF/FDM - Method
  • Minimum layer thickness: 0,1 mm
  • Printing area:
    Ground area 400 mm x 400 mm
    Height: 300 mm
  • Nozzle diameter: 0,6 mm (Industrierubin)
  • Heated print bed up to 120°C

Slicer: Cura

Printer settings: 0,15mm PLA

Delta Tower v2 und v3

Training period for independent usage, without previous knowledge: approx. 3 - 5 h

Deltatower-v2-TotaleDeltatower-Totale  
  • FFF/FDM - Method
  • Minimum layer thickness: 0,05 mm
  • Printing area: 330 mm diameter, 600mm Height
  • Nozzle diameter: 0,5 mm und 0,8mm (Industrierubin)
  • Heated print bed up to  75 °C

Slicer: Cura

DPrinter settings: 0,15mm PLA

Formlabs Form 1+

Training period for independent usage, without previous knowledge: approx. 2 - 3 h

Formlabs-Totale 
  
  • SLA-method with different photopolymeres
  • Space: 125x125x165mm
  • Minimum layer thickness: 0,025 mm

Slicer: PreForm

Printer settings: Use the specifications of the manufacturer

Peopoly Moai (zwei Stück)

Training period for independent usage, without previous knowledge: approx. 2 - 3 h

Moai 
  
  • SLA-method with different photopolymeres
  • Space: 130x130x180mm
  • Minimum layer thickness: 0,025 mm

Facilitation and support by Peopoly

Printer settings: Use the specifications of the manufacturer

Create support with Asura  and slice with modified Cura 

 

 

Stratasys Objet 30 Prime

Training period for independent usage, without previous knowledge: approx. 3 - 5 h

Objet-Totale 
  
  • Objet-method with different photopolymeres
  • Space: 294x192x148,6mm
  • Minimum layer thickness: 0,016 mm

Slicer: Objet Studio (it is installed on the operating computer)

Printer settings: Use the specifications of the manufacturer

 


 Inkubator_Foerderer

Last Modification: 28.05.2020 - Contact Person: Webmaster